JUAL Allen-Bradley 1734 POINT I/O Modules DIJAMIN ORI DAN LEBIH MURAH

POINT I/O Modules

Our Bulletin 1734 POINT I/O™ modules offer digital, analog, and specialty I/O, as well as POINT Guard safety-rated I/O, with one to eight points per module. You can mix standard and safety I/O in the same system. Comprehensive diagnostics and configurable features make POINT I/O easy to apply.

Features

• Modular design lets you independently select the I/O, termination style, and network interface
• Modules slide together for easy install and uninstall for easier maintenance
• Removable wiring system saves time and money during installation and troubleshooting
• Comprehensive diagnostics and configurable features makes POINT I/O™ easy to apply
• Removal and Insertion Under Power (RIUP) lets you replace modules while the system is in operation
• Mount horizontally or vertically, with no de-rating required
• Auto Device Replacement (ADR) reduces downtime
• Add-on-Profiles in the Studio 5000 Logix Designer® application provide smooth integration into Integrated Architecture systems
• Available with conformal coating

1734 POINT I/O Digital Modules

• Input, output, and relay output modules
• Wide variety of voltages
• Point-level output fault states for short-circuit and wire-off diagnostics
• Field-side diagnostics on select modules
• Choice of direct-connect or rack-optimized communications
• POINT Guard I/O™ modules for safety applications
• Configurable modules
  • Each point can be configured as a DC input or output
  • Available with DeviceLogix™ technology

1734 POINT I/O Analog Modules

• Up to eight single-ended inputs or outputs per module
• Thermocouple and RTD modules available
• Individually configurable channels
• On-board scaling
• Selectable input filters
• Over- and under-range detection

1734 POINT I/O Specialty Modules

• Counter and encoder modules
• Synchronous Serial Interface Absolute Encoder module
• Serial interface modules (RS-232, RS-485/RS-422)
• Address Reserve (ARM) module
• Supports connection to IO-Link enabled devices with the IO-Link master module

1734-232ASC	Point I/O RS232 ASCII Interface
1734-485ASC	RS485/422 ASCII Interface
1734-4IOL	POINT 4 Channel IO-Link Master Module
1734-ACNR	24V Dc Controlnet Adapter
1734-ADN	24V Dc Devicenet Adapter
1734-ADNX	24V Dc Devicenet Adapter With Subnet Expansion
1734-AENT	1-Port EtherNet I/O Adapter Module
1734-AENTR	2-Port EtherNet I/O Adapter Module
1734-APB	Point Profibus W/24Vdc Ps
1734-ARM	Address Reserve Module
1734-EP24DC	24V DC Power/Bus Extension Module
1734-EPAC	120V AC Power/Bus Extension Module
1734-FPD	Field Potential Distributor
1734-IA2	120 Vac 2 Channel Input Module
1734-IA4	120 Vac 4 Channel Input Module
1734-IB2	24V Dc 2 Channel Sink Input Module
1734-IB4	24V Dc 4 Channel Sink Input Module
1734-IB4D	24V Dc 4 Channel Sink Diagnostics Input Module
1734-IB8	24V Dc 8 Channel Sink Input Module
1734-IE2C	24V Dc 2 Channel Analog Current Input Module
1734-IE2V	24V Dc 2 Channel Analog Voltage Input Module
1734-IE4C	24V Dc 4 Channel High Density Analog Current Input Module
1734-IE8C	24V Dc 8 Channel High Density Analog Current Input Module
1734-IJ	5 Vdc Incremental Encoder Module
1734-IK	24 Vdc Incremental Encoder Module
1734-IR2	24V Dc 2 Channel RTD Input Module
1734-IR2E	24V Dc 2 Channel RTD Input Module
1734-IT2I	24V Dc 2 Channel Thermocouple Input Module
1734-IV4	24V Dc 4 Channel Source Input Module
1734-IV8	24V Dc 8 Channel Source Input Module
1734-OA2	120/230 Vac 2 Channel Output Module
1734-OA4	120/230 Vac 4 Channel Output Module
1734-OB2	24V Dc 2 Channel Source Output Module
1734-OB2EP	24V Dc 2 Amp 2 Channel Source Output Module, Electronically Protected
1734-OB4	24V Dc 4 Channel Source Output Module
1734-OB4E	24V Dc 4 Channel Source Output Module, Electronically Protected
1734-OB8	24V Dc8 Channel Source Output Module
1734-OB8E	24V Dc8 Channel Source Output Module, Electronically Protected
1734-OE2C	24V Dc 2 Channel Analog Current Output Module
1734-OE2V	24V Dc 2 Channel Analog Voltage Output Module
1734-OE4C	24V Dc 4 Points Analog Current Output Module
1734-OV4E	24V Dc 4 Channel Sink Output Module, Electronically Protected
1734-OV8E	24V Dc 8 Channel Sink Output Module, Electronically Protected
1734-OW2	24V DC 2 Point N.O. SPST Relay Output Module
1734-OW4	24V DC 4 Point N.O. SPST Relay Output Module
1734-OX2	24V DC 2 Point N.O/N.C. Dpst Relay Output Module
1734-PDN	Devicenet Interface Module
1734-RTB	Replacement IEC Screw Terminal Block
1734-RTB3	Replacement 12 Position IP20 Screw Terminal Block
1734-RTB3S	Replacement 12 Position IP20 Spring Terminal Block
1734-RTBCJC	Repl Screw Term Blk CJC Repl Screw Term Blk CJC
1734-RTBS	Replacement IEC Spring Terminal Block
1734-SSI	SSI Absolute Encoder Interface
1734-TB	Module Bases W/ Removable IEC Screw Terminals
1734-TB3	12-Position IP20 Screw Terminal Bases (Qty 10)
1734-TB3S	12-Position IP20 Spring Ternimal Bases (Qty 10)
1734-TBCJC	Screw Terminal Base CJC Spring Terminal Base CJC
1734-TBS	Module Bases W/ Removable IEC Spring Terminals
1734-TOP	POINT I/O One-piece Terminal Base with Screw Clamp, 8 Terminations
1734-TOP3	POINT I/O One-piece Terminal Base with Screw Clamp, 12 Terminations
1734-TOP3S	POINT I/O One-piece Terminal Base with Spring Clamp, 12 Terminations
1734-TOPS	POINT I/O One-piece Terminal Base with Spring Clamp, 8 Terminations
1734-VHSC24	24 Vdc Very High Speed Counter With Source Outputs
1734-VHSC5	5 Vdc Very High Speed Counter With Source Outputs
1734-VTM	Voltage Terminal Module. Single-slot 12 mm wide Voltage Terminal Modules

JUAL Allen-Bradley 1734 POINT Guard I/O Modules DIJAMIN ORI DAN LEBIH MURAH

POINT Guard I/O Modules

POINT Guard I/O™ modules are safety-rated I/O modules designed to fit into the standard POINT I/O™ system, offering automation and safety functionality in a maximum density I/O solution. POINT Guard I/O communicates by using the CIP™ safety protocol over EtherNet/IP™ for GuardLogix® controllers or DeviceNet™ for SmartGuard™ 600 controllers.

Features

• Fits into the standard POINT I/O™ system
• Communicates by using the CIP™ Safety protocol over EtherNet/IP™ for GuardLogix™ controllers
  
  • For EtherNet/IP connectivity, use a POINT I/O EtherNet/IP adapter (1734-AENT, 1734-AENTR)

1734 POINT Guard I/O™ system

• Supports 24V DC I/O circuits
• Includes analog input circuits

Catalog Number	Description
1734-IB8S	POINT Guard I/O Safety Module - 8 Point Input Module (Compatible with terminal bases with 8 terminations)
1734-IE4S	POINT Guard I/O Safety Module - 4 Safety Analog Input Module (Compatible with terminal bases with 12 terminations)
1734-OB8S	POINT Guard I/O Safety Module - 8 Safety Sourcing Output Module (Compatible with terminal bases with 8 terminations)
1734-OBV2S	POINT Guard I/O Safety Digital Output Module

JUAL Allen-Bradley 1732ES ArmorBlock Guard I/O Modules DIJAMIN ORI DAN HARGA LEBIH MURAH

ArmorBlock Guard I/O Modules

Our Bulletin 1732 ArmorBlock® Guard I/O™ modules provide all the advantages of traditional distributed I/O for safety systems. These modules are available in an IP67-rated packaged for EtherNet/IP™ and are ready to mount directly on your machine.

Features

• Used only with GuardLogix®, Compact GuardLogix, and Armor™ GuardLogix, configurable with a module-specific profile in Studio 5000 Logix Designer® software
• Provides PLd-rated, single channel safety inputs and PLe-rated, dual channel, safety inputs; safety outputs rated up to PLe
• Available in bipolar and sourcing safety output configurations
• Includes dual Ethernet ports for Linear and Device Level Ring topologies
• Provides rotary switches to set the IP address
• Mounts on the machine with an IP65-rated package for dust and wash-down protection
• Provides standardized M12 connectors to wire your field devices

Catalog Number	Description
1732ES-IB16	EtherNet/IP Safety ArmorBlock Input Module 16 Inputs, IP67 Rating
1732ES-IB8XOB8	EtherNet/IP Safety ArmorBlock Input Module 8 Inputs, 8 Solid State Sourcing Outputs, IP67 Rating
1732ES-IB8XOBV4	EtherNet/IP Safety ArmorBlock Input Module 8 Inputs, 4 Solid State Bi-Polar Outputs, IP67 Rating
1732DS-IB8	DeviceNet Safety ArmorBlock Input Module, 8 Inputs, 8 Test Outputs
1732ES-IB12XOB4	EtherNet/IP Safety ArmorBlock Input Module, 12 Inputs, 4 Solid State Sourcing Outputs
1732ES-IB12XOBV2	EtherNet/IP Safety ArmorBlock Input Module, 12 Inputs, 2 Solid State Bi-Polar Outputs

JUAL Allen-Bradley ArmorBlock I/O Modules, DIJAMIN ORI DAN LEBIH MURAH

ArmorBlock I/O Modules

Our Bulletin 1732D and 1732E ArmorBlock® I/O modules provide low-cost, hardened, I/O suitable for on-machine use. You can mount these modules on a machine close to the sensors and actuators to provide shorter cable runs for automotive, material handling, and high-speed packaging applications. These modules are available for DeviceNet™ and EtherNet/IP™ networks and are suitable for use in welding applications and end-of-arm robot applications.

Features

• Available with water- and corrosion-proof plastic and nickel-plated aluminum sealed housing
• Offers rating for IP69K and NEMA 4X (when marked) for use without an enclosure
• Includes LEDs for module and/or channel level alarms and diagnostics which can reduce machine downtime
• Provides efficient installation and replacement without having to rewire which can reduce wiring errors
• Includes Add-On Profiles in the Studio 5000™ Logix Designer application

1732D ArmorBlock DeviceNet I/O Blocks

• Offers 8 or 16 points per block
• Offers 1732DS ArmorBlock Guard I/O modules for safety applications
• Includes network-powered I/O circuits on some blocks

1732E ArmorBlock EtherNet/IP I/O Blocks

• Includes slim and standard form factors
• Offers 4, 8, or 16 points per block
• Offers 1732ES ArmorBlock Guard I/O modules for safety applications
• Supports DLR topology and power daisy chain on selected modules
• Includes high-speed time-stamping inputs and scheduled output modules for demanding and high-speed applications
• Offers high accuracy and fast conversion rate analog modules
• Includes QuickConnect block with less than 250ms power up time for tool changer application
• Supports connection to IO-Link enabled devices with the IO-Link master module

1732D/E Armor WeldBlock I/O Blocks

• Resists the effects of weld slag and magnetic fields found in close proximity to weld heads
• Offers 16 points per block
• Includes QuickConnect block with less than 250ms power-up time for tool changer application

 

Catalog Number	Description
1732D-16CFGM12M12	1732 ArmorBlock DeviceNet Digital I/O, Standard and Diagnostic, DeviceNet, Self-Configuring, 16 Self-Configuring, DC Micro (M12)
1732D-16CFGM12MN	1732 ArmorBlock DeviceNet Digital I/O, Standard and Diagnostic, DeviceNet, Self-Configuring, 16 Self-Configuring, DC Micro (Mini)
1732D-8CFGM12	1732 ArmorBlock DeviceNet Digital I/O, Standard and Diagnostic, DeviceNet, Self-Configuring, 8 Self-Configuing, DC Micro (M12)
1732D-8CFGM8	1732 ArmorBlock DeviceNet Digital I/O, Standard and Diagnostic, DeviceNet, Self-Configuring, 8 Self-Configuing, Pico (M8)
1732D-OB16M12M12	1732 ArmorBlock DeviceNet Digital I/O, Standard and Diagnostic, DeviceNet, Output Module, 16 Source Outputs, DC Micro (M12)
1732D-OB16M12MINI	1732 ArmorBlock DeviceNet Digital I/O, Standard and Diagnostic, DeviceNet, Output Module, 16 Source Outputs, DC Micro (Mini)
1732E-12X4M12P5QCDR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input / Output Module, 12 Inputs / 4 Outputs, Dual-Port, Quick Connect, With Diagnostics, 5-PIN Aux, DC Micro (M12), Without CIP SYNC Input, With Diagnositcs, Dual Port
1732E-12X4M12QCDR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input / Output Module, 12 Inputs / 4 Outputs, Dual-Port, Quick Connect, With Diagnostics, DC Micro (M12), Without CIP SYNC Input, With Diagnositcs, Dual Port
1732E-16CFGM12P5QCR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Self-Configuring, 16 Self-Configuring, Dual-Port, Quick Connect, 5-PIN Aux, DC Micro (M12), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-16CFGM12QCR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Self-Configuring, 16 Self-Configuring, Dual-Port, Quick Connect, DC Micro (M12), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-16CFGM12R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Self-Configuring, 16 Self-Configuring, Dual-Port, DC Micro (M12), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-8CFGM8R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input / Output Module, 8 Configurable Digital I/O, Dual-Port, DC Micro (M8), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-8IOLM12R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input / Output Module, 24V DC 8 Input/output IO-Link Master M12 with Dual-Port Ethernet/IP, DC Micro (M12), Without CIP SYNC Input, With Diagnositcs, Dual Port
1732E-8X8M12DR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input / Output Module, 8 Inputs / 8 Outputs, Dual-Port, With Diagnostics, DC Micro (M12), Without CIP SYNC Input, With Diagnositcs, Dual Port
1732E-IB16M12DR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input Module, 16 Sink Inputs (Source Load), Dual-Port, With Diagnostics, DC Micro (M12), Without CIP SYNC Input, With Diagnositcs, Dual Port
1732E-IB16M12R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input Module, 16 Sink Inputs (Source Load), Dual-Port, DC Micro (M12), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-IB16M12SOEDR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input Module, 16 Sink Inputs (Source Load), Dual-Port, CIP SYNC Input, With Diagnostics, DC Micro (M12), With CIP SYNC Input, With Diagnositcs, Dual Port
1732E-IB8M8SOER	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input Module, 8 SOE Sink Inputs, Dual-Port, DC Micro (M8), With CIP SYNC Input, Without Diagnostics, Dual Port
1732E-IF4M12R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input Module, 4-Point Analog Input, DC Micro (M8), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-IR4IM12R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input Module, 4-Point Isolated RTD Input, DC Micro (M12), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-IT4IM12R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Input Module, 4-Point Isolated Thermocouple Input, DC Micro (M12), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-OB16M12DR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Output Module, 16 Source Outputs, Dual-Port, With Diagnostics, DC Micro (M12), Without CIP SYNC Input, With Diagnositcs, Dual Port
1732E-OB16M12R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Output Module, 16 Source Outputs, Dual-Port, DC Micro (M12), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732E-OB8M8SR	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Output Module, 8 Scheduled Sourcing Output, Dual-Port, DC Micro (M8), With CIP SYNC Input, Without Diagnostics, Dual Port
1732E-OF4M12R	1732 ArmorBlock EtherNet/IP, EtherNet/IP, Output Module, 4-Point Analog Output, DC Micro (M12), Without CIP SYNC Input, Without Diagnostics, Dual Port
1732IL-IB16M12	1732IL ArmorBlock IO-Link Hub, IO-Link, Input Module, 16 Input Module, DC Micro (M12)
1732E-16CFGM12P5QCWR	1732 Armor WeldBlock Digital I/O, EtherNet/IP, Self-Configuring, 16 Self-Configuring, DC Micro (M12) with Quick Connect 5 Pin